Control panel "PAS832"

Distinctive features:
- 8 fully-programmable hardwire zones on control panel;
- Expandable up to 32 zones using EXM800 expansion modules or KM20(T) keypads;
- 3 programmable outputs on control panel;
- Expandable up to 16 outputs using EXM800 expansion modules;
- Supports 15 modules on system bus;
- Up to 31 user codes;
- 16 timers;
Basic features:
- 4 area partitioning;
- RID820 access control compatibility;
- Auto arm/disarm;
- 1024 event log including date, time, user name/zone;
- Built-in communicator for PSTN type telecommunications;
- DTMF and Pulse type dialling;
- Telecom line cut supervision;
- Full Contact ID communication protocol;
- 1.0A switching-mode power supply with shortcircuit protection, battery charge & discharged battery disconnection circuits;
- Programming system parameters with PC.

Keypads "KM20" and "KM20T"

Functional LCD keypads provide menu-driven control of the entire MAS-800 system. From keypad you can arm/disarm the alarm system, open/close the garage, adjust thermostats, schedule lighting scenes and much more.

- Deluxe 32-character backlit, dual-line LCD display;
- Multi language support;
- Custom alphanumeric zone directory;
- Intuitive menu;
- Fire, police, medical help dual button shortcuts and up to 32 custom hotkeys;
- Custom alphanumeric hotkey directory;
- Built-in 2 zone expansion module;
- Supervised tamper switch;
- Built-in Temperature Sensor (KM20T only);
- 4 LED indicators : Pre-alarm, Arm, Armed, Trouble;
- Optional decor friendly grey/white design.

Expander module "EXM800"

EXM800 makes possible extention of the alarm system by 8 zones or 7 outputs. Proportion of zones and PGM outputs can variate.
Features of the zones and functional characteristics of the outputs are identical as those of the main board of the alarm control panel.

- 8 programmable zone/output terminals;
- 7 terminals can be programmed as OC type outputs;
- 8 terminals can be programmed as zones;
- Diagnostic and module address indication by LED;
- Output current-carrying capacity: 50mA;
- Operating Voltage: 9-14 VDC.

Remote control module "RCM800"

Provides a fast and reliable keyless access control without mechanical parts, card slot or magnetic heads to clean and maintain.

-  Built-in 434 MHz  RF receiver;
-  Up to 255 hopping code RF transimitters;
-  2 on board 15A  12VDC  relays for control purposes;
-  2 100mA  open collector outputs for controlling purposes;
-  Stand-alone mode or integration with MAS800.

Access control module "RID820"

Module protects from speedy-theft or damage of control panel during the entry delay time. RID820 enables to control entry delay. If there is no RFID card in identification area, entry delay will not be provided;  alarm will immediately start after opening doors of the building.

- Built-in 2,4 GHz RF receiver;
- Up to 20 RFID cards;
- RFID card's message “Low battery” to KM20(T);
- Card's identification zone from RID820 - up to 5m;
- Diagnostics and indication of module's adress by LED.

RF Carrier detection 'D-JAM'

Detector 'D-JAM' continually scans radio and generates negative signal in it's output if detects that the level of RF radiaton is higher than preset thereshold.

Metal Box "CAS8"

- White, steady metal box;
- Tamper switch;
- Size: 264 x 294 x 90 mm;
- Transformer: 30 VA;
  - Primary circuit: 230 V AC, 50 Hz;
  - Secondary circuit: 20 V AC, 50 Hz;
- 230 V fuse: 250 mA;
- Up to 5 modules can be placed in the box;
- Place for 12V 7Ah/20Hr battery.

Programme "MAS CAD"

"MAS CAD" software is designed for installers of intruder alarm systems. By using this software installers can achieve fast and efficient programming of MAS800 alarm system.

MAS CAD software allows:
- Create installation plan of alarm system: draw scheme of the the building, mark placing of control panel, modules, detectors and devices controlled by PGM outputs also wiring diagrams; 
- Edit modules, partitions, zones, PGM outputs, users, timers, settings of reporting and hotkeys, change languages;
- Print out the settings.