Kodinis Raktas
 
Products
FAQ
Manuals
About us
Contacts




  GSM modules


GSM communicators are devices wich main purpose is to transmit alarm messages over GSM network, also remote control of alarm system and/or additional equipment. 

 

GSM communicators "ELITA GSW1" and "ELITA GSW1G"

GSW1 and GSW1G  are easy to install supplements compatible with KODINIS RAKTAS car alarms and CAN bus adapter CANREADER only.

Basic Features:
- 1 wire serial interface to link with car alarm or CANREADER;
- possibility to arm/disarm C60 type car alarm by phone;
- shock sensor sensitivity adjusment by SMS (for C60 and GN7 car alarms only);
- instant voice messages to pre-programmed telephone numbers immediately after the alarm system is triggered;
- possibility to pre-programme up to 3 telephone numbers;
- easy system configuration and programming of telephone numbers by merely one phone call with your mobile;
- 4 digit PIN code to change the settings;
- 2 on board 15A relays for optional control purpose;
- engine immobilization.
GSW1 features:
- Optional SMS sending to the first pre-programmed telephone number immediately after the alarm system is triggered, system arming/disarming also when battery voltage falls below the set voltage.
GSW1G features:
- Optional SMS sending to all pre-programmed telephone numbers immediately after the alarm system is triggered, system arming/disarming also when battery voltage falls below the set voltage;
- possibility to use backup battery.
- vocal menu.
- GPS receiver for detecting exact car’s location.


  "GSW1" user manual.pdf  pdf small
"GSW1" installation manual.pdf  pdf small

 

GSM communicator "ELITA GSW1U"

GSW1U – universal communicator which can be linked to almost any type of alarm system as well can operate in stand-alone mode.

Features:
- 4 independent zones;
- alarm system arm/disarm state detection input.
- 4 different modes for arm/disarm state detection;
- possibility to assign one of listed alarm messages to every zone;
- instant voice messages to pre - programmed telephone numbers immediately after the alarm system is triggered;
- possibility to pre-programme up to 3 telephone numbers.
- Optional SMS sending to the first pre - programmed telephone number immediately after the alarm system is triggered, system arming / disarming also when battery voltage falls below the set voltage;
- Easy system configuration and programming of telephone numbers by merely one phone call with your mobile.
- 4 digit PIN code to change the settings.
- 2 on board 15A relays for optional control purpose.

 "GSW1U" user manual.pdf  pdf small
"GSWU1" installation manual.pdf  pdf small

 GSM communicator "GSW2"

GSW2 – module of MAS800 intruder alarm system compatible with all control panels made by KODINIS RAKTAS.

Features:
- possibility to arm/disarm system, clear alarm, inquiry to send SMS with system status by telephone;
- system’s control protected with user’s PIN code;
- posibillity to pre-programme up to 5 telephone numbers;
- optional SMS sending to selected telephone numbers immediately after the alarm system is triggered also after arming/disarming the system;
- possibility to report security service via Contact ID protocol;
- easy system configuration and programming of telephone numbers by merely one phone call with your mobile;
- possibility to connect microphone and when system is armed activate  listen-mode;
- 2 on board 15A relays for optional control purpose.


"GSW2" user manual.pdf  pdf small